|
Material
Safety Data Sheets of Ferrous lactate
FIRST AID MEASURES
General advice Show this safety data sheet to the doctor in attendance.
Show this safety data sheet to the doctor in attendance.
Skin contact: Immediately remove all contaminated clothing, including
footwear. flush skin and hair with plenty of water or tepid water.
Eye contact: IImmediately hold eyelids apart and flush eyes with
plenty of water at least 15minutes.If irritation persists, call
a physician.
Inhalation: Immediately remove to fresh air.If breathing is difficult,
give oxygen, call a physician.
Ingestion : If swallowed, give plenty of water. If in doubt, Call
a physician immediately.
FIRE
FIGHTING MEASURES
Fire extinguish: Remove the source of ignition. Use water spray
or extinguishing media
Extinguishing media: Carbon dioxide(CO2), foam
ACCIDENTAL RELEASE MEASURES
Personal precautions Ensure adequate ventilation, Wear personal
protective equipment, Avoid contact with skin and eyes.
Environmental precautions: Prevent further leakage or spillage.
Avoid generating dust
Methods for cleaning up: Place spilled material in clean, dry,
sealable, labeled container Clean up the leaked place with plenty
of water
HANDLING
AND STORAGE
Handling: Keep the container well when handling. Handle the materials
on clean clothes and in a cleaned room. Avoid dust formation
Storage : Keep container tightly closed. Keep in properly labeled
containers. Store in areas shielded the light, and below room
temperature. Keep away from strong acids and strong oxidisers
Packaging material: Plastic containers, Paper drum with plastic
liner
EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering measures to reduce exposure :Ensure adequate ventilation,
especially in confined areas
Personal protection equipment : Wear personal protective equipment.
Avoid contact with skin and eyes.
Hygiene measures : Set up safety shower, hands washer and eyes
washer nearby handling the materials. Indicate the positions distinctly.
When using, do not eat, drink or smoke. Remove and wash contaminated
clothing before re-use.
STABILITY AND REACTIVITY
Stability : Stable at normal conditions. Avoid temperatures above
200¡æHazardous polymerization does not occur.
Materials to avoid: Avoid oxidizing agents, acid
Hazardous decomposition products : Carbon oxides
TOXICOLOGICAL INFORMATION
Mutagenicity Negative to Ames test Recognized a chromosomal aberration
to CHL cell. Negative to micronucleus test
Acute toxicity LD50 287 mg/kg-bw. (rabbit,vein)
LD50 578 mg/kg-bw. (rabbit,hypoderman)
LD50 147 mg/kg-bw. (mouse,oral)
Tumorigen LDL0 4200 mg/kg-bw. (mouse, hypodermal)
ECOLOGICAL
INFORMATION
Mobility : Completely soluble, readily biodegradable, does not
occur hazardous polymerization. Chemical Oxygen Demand (COD) 0.84
gO2/g
DISPOSAL CONSIDERATIONS
Contaminated packaging : Decontaminate empty containers with water,
dilute with water and flush to waste system. Recycle containers
if possible.
Further information Treatment, storage, transportation, and disposal
must be in accordance with local regulations.
TRANSPORATION
INFORMATION
Transporation information : Sticking properly on label, indicating
material name, lot No., net weight etc.The materials transportation
by vehicles, the sender serves deliverers with instructions for
safe handling. In transportation confirm leakless of the container,
and load the materials not to upset, fall and damage. Secure preventing
the load from falling.
|