|
Material
Safety Data Sheets of Albendazole
Section 1 Identification
Product number:
Product name:albendazole
Section 2 Hazard Identification
May cause harm to the unborn child.
Irritating to eyes, respiratory system and skin.
In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
Do not breathe dust.
Section
3 First Aid Measures
If swallowed, wash out mouth with water provided person is conscious.
Call a physician.
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes. Call
a physician.
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
In case of contact with eyes, flush with copious amounts of water
for at least 15 minutes. Assure adequate flushing by separating
the eyelids with fingers. Call a physician.
Section
4 Fire Fighting Measures
Extinguishing media
Water spray.
Carbon dioxide, dry chemical powder or appropriate foam.
Special firefighting procedures
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.
Unusual fire and explosions hazards
Emits toxic fumes under fire conditions.
Section 5 Accidental Release Measures
Wear self-contained breathing apparatus, rubber boots and heavy
rubber gloves.
Sweep up, place in a bag and hold for waste disposal. Avoid raising
dust.
Ventilate area and wash spill site after material pickup is complete.
Section 6 Handling and Storage
Handling see section 7.
Storage
Keep tightly closed.
Store in a cool dry place
Section 7 Exposure Controls & Personal
Wear appropriate respirator, chemical-resistant gloves, safety
goggles, other protective clothing.
Use only in a chemical fume hood.
Safety shower and eye bath.
Do not breathe dust.
Do not get in eyes, on skin, on clothing.
Wash thoroughly after handling.
Section 8 physicual and chemical properties
Appearance: White or almost white solid, odor.
Melting point: 208 to 210'c
Section
9 toxicological information
Acute
effects
May be harmful by inhalation, ingestion, or skin absorption.
Causes eye and skin irritation.
Material is irritating to mucous membranes and upper respiratory
tract.
Chronic effects
May cause congenital malformation in the fetus.
To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Toxicity data
Orl-rat LD50:2400 mg/kg
Ivn-rat LD50:265 mg/kg
Orl-mus ld50:1500 mg/kg
Orl-ham ld50:>10 gm/kg
Section
10 stability and reactivity
Stability
Stable.
Hazardous combustion or decomposition products toxic fumes of:
Carbon monoxide, carbon dioxide
Nitrogen oxides
Sulfur oxides
Hazardous polymerization will not occur.
Section
11 other information
This MSDS summary is best knowledge of the health and safety hazard
information of the product, and in particular how to safely handle
and use the product in the workplace. The above information is
believed to be correct but does not purport to be all inclusive
and shall be used only as a guide.
|